Newer posts are loading.
You are at the newest post.
Click here to check if anything new just came in.

December 19 2017

Spice Rack

This is just a quick and dirty spice rack I put together for my wife. It’s a piece of plywood (supported at an angle by a chunk of 2×4) with some maple cleats glued and stapled to the front. Figuring out the size and placement of the cleats took the longest (Thanks Ben and Eric), but the entire project only took an hour or so. I wasn’t originally going for a documented tutorial, so the pictures are just of the finished product. Someone else’s measurements would vary anyhow, given the sizes of their cupboard and its contents. It’s the thought that counts, right?

The AnyBox

It’s that time of the year again.  Now that all your gifts are made it’s time for the fun part.  Wrapping them!  You could do what you do every year and layer the gifts to made for your closest friends and family in tape and ribbon.  Why not make the perfect box for your gift?

The AnyBox design

With Fusion 360’s new(ish) sheet metal mode you can laser cut the perfect size box for your gift.  Best of all the work is already done.  All you have to do is download “The AnyBox” file from the link below and change the parameters to fit your gift.  Just follow these instructions for a one size fits all box!

Download the Fusion 360 file HERE.

From the “modify” menu in the “sheet metal” section choose “changeparameters”.

Change the BoxHeight, BoxWidth, and BoxLength for your item.  Change MaterialThickness to match your box material.

Click “OK” and create a flat version of your AnyBox by selecting “unfold” from the “modify” menu.  Select any face as the “stationary entity” and check the “unfold all bends” box.

Finally export your flat box as a DXF file for your laser.

Repeat for each of your gifts.

December 16 2017

A new Challenger Approaches

It’s never too early to think about racing PowerWheels… #OMGFTW

December 13 2017

Soli-Konzert: Ein-Rad-für-Ingo

WIDESCOPE COLLECTIVE und GÄSTE spielen kurze Konzerte. Auf Spendenbasis.

Sa. 16.12. ab 20 Uhr

December 12 2017

2017-12-16 Julehack med snøfnugg

Vi arrangerer en liten workshop på lørdag med pepperkaker. Stedet er Bergen Offentlige Bibliotek, 2 etg og verkstedet fra 11-15.

Hackbergen tar med seg pepperkakene og du kan ta med deg et (jule)prosjekt å jobbe med.

Det blir hjelp å få til å lage snøfnugg til dekorasjon vha skarpe kniver, som vi kan laminere for at de skal holde seg.

 

Meld dere på FB eventen, slik at vi ser hvor mange som kommer: https://www.facebook.com/events/157212804897811/

 

Her er eksempler på hva vi har jobbet med før og innføring i hvordan man kan gjøre det..

http://www.instructables.com/id/Making-Six-Sided-Paper-Snowflakes-LIKE-A-BOSS/

https://chimeradragonfang.deviantart.com/gallery/57201/Snowflakes

December 11 2017

Deck Your Halls! Wreath Workshop

Deck Your Halls: Wreath Workshop When: Saturday, December 16, 2017, 11am – 2 pm Where: i3Detroit  Who: 6 students max Cost: $20/Student (Eventbrite) What: Local small business woman Sue Bussell teaches you how to create those big, gorgeous professional-looking bows, strategies for silk flowers, and the basic essentials of holiday floral decorations! Bring your own […]

Digital Music Basics

When: January 14, 3-5 PM Where:  1481A Wordsworth Street, Ferndale, MI 48220 Max Class Size: 10 Cost: $5 (Get tickets now on Eventbrite!) Class Description: Have you ever wanted to sit down and play a tune on the piano for your family or friends? By the end of this class, you should be able to do just […]

December 09 2017

New Ryobi Tool Center

It’s been a few months now, but I’m finally getting to documenting the tool storage wall we built. I found a plan online to build some PVC drill/driver hangers, and adapted it to carry the grinder, glue gun and angle drill by their battery holders.

All the tools in one place!

The slanted pipes below the drills are some spare PVC cemented to a piece of Sintra (which is also PVC, so I used pipe solvent). These tubes, which have since been labeled, hold cylindrical tools, such as our rotary and oscillating multitools and apparently a caulk gun.

If you’re in the market for some drill hangers for yourself, we have a fancy jig built (for 3″ pipe, but 4″ works too), so c’mon down and build some for yourself!

December 03 2017

Pleasant Prairie Mini Maker Faire

On the Saturday after Thanksgiving we headed down to Pleasant Prairie to take part in the second Pleasant Prairie Mini Maker Faire. It was a small event, with about 40 makers and 1,400 attendees but we had a good time showing off some of our projects and taking to people about making.

As always, Mark’s Van de Graaff generator was a big hit, shocking young and old alike, and making people’s hair stand up on end. Mark also brought Ultra MegaMax Dominator so people could see a huge DIY 3D printer in action. (Sadly since the event was so short, he couldn’t do a very large print, but he had some to show off.)

Besides Mark’s UMMD I brought a 3D printing pen I got from Monoprice for cheap and Shane and I made various 3D printed “doodles” with the pen while talking to people about it. At least a few visitors were interested in it as a holiday gift.

Besides Mark, Shane, and myself, Karen was there and did a bit more of her melted crayon ornament craft for people. We also had a few other members show up and hang out for a while, which was nice as it gave us a break to check out the Faire.

Oh, as for the venue, it was at the Pleasant Prairie RecPlex which was like a YMCA, and it was a little weird that there were basketball games going on right behind us, but luckily there were able to use the pool for a cardboard boat regatta that some of the young makers took part in. There was plenty of room for Makers, and I can imagine that the Faire will grow over the years and have plenty of space to double in size.

See you next year, Pleasant Prairie!

Raspberry Pi NES Build

Over the years I’ve played around with the Raspberry Pi to see what I can get it to do. I have limited programming skills and rely heavily on the opensource community and how-to documents.

The most successful projects I’ve done with the Raspberry Pi have revolved around using them as DNS and VPN servers. I also have them running with a monitor and wireless keyboard/trackpad combo in the basement utility room and garage. The screen on my phone to look up something in those rooms gets to be a little small and I’m usually using the phone as a flashlight so having a full sized monitor comes in very handy.

One of the things I’ve wanted to do for a while is build a portable gaming machine. Something that could easily go in luggage and look decent to the TSA as it gets scanned. I tried putting something together in 2013 with a Raspberry Pi B first gen, but struggled with lag and the controller setup. As luck would have it, I’ve had an extra Raspberry Pi 3 Model B sitting around I’ve been trying different projects with, but haven’t found the one until I read about RetroPie again.

RetroPie provides an easy installation method to get different emulators up and running on the Raspberry Pi. I had purchased some SNES Classic USB Super Nintendo Game Controller in 2013 when I first gave this a shot.

Once I had RetroPie up and running, I decided the standard Raspberry Pi case was just not enough. I found the BabyNES Raspberry Pi B+ case on Thingiverse and liked the looks. Then it was just a matter of printing and assembling.

A few more pictures of the assembly process and the final product:

 

 

 

December 02 2017

“Gingerbread” “House” Event – 12/19/2017

Hey gang, it’s time again for OMG’s annual Gingerbread House event. Note that this event has no actual gingerbread (we use graham crackers) and few, if any, “houses” in the traditional sense. In the past, we’ve seen locomotives, hobbit holes and skyscrapers.

This years’s event coincides with the regular meeting on December 19th. As usual, doors open around 5:30pm and people are usually around until 9 or 10pm. The start time is nominally 6pm, but realistically people will arrive and work on their construction whenever on that evening.

Frosting “mortar” and whatever decorations leftover from last year will be provided, but please consider bringing a box of crackers and some things to decorate with.

This is traditionally an “open house” sort of event, with folks bringing friends and family. The holidays are for group gatherings, after all.

Hope to see everyone there!

November 29 2017

Coming Soon – Drill Torture Tests

Just a sneak preview of an upcoming “project” at OMG… Member Ben found a great old drill at Habitat ReStore, and it spawned a conversation about torture testing various drills under extreme circumstances.  As a test, we pitted Ben’s drill against one of our cordless Ryobis… More “sciencey testing” to follow.

Remember, these sorts of things aren’t really planned or scheduled in advance; the best way to get involved is to show up a the space on our regular Tuesday meeting nights (along with off-week Thursdays, like tomorrow night).  Doors typically open around 5:30, and you’re invited!

November 28 2017

OpenChaos am Donnerstag, 30.11.2017: Kritische Infrastrukturen

Das November-OpenChaos beschäftigt sich mit dem Thema kritische Infrastrukturen, und was das überhaupt mit dem technisch versierten Mensch vor'm Computer zu tun hat.

PS:1 friendship fuels a Kickstarter

Deanna and I have a Kickstarter.

If you are interested in finding out about our Kickstarter (Fingerstender) check us out.
I invented the Fingerstender in 2008 and Deanna and I made improvements to it. The current Fingerstender is better.

We are halfway to our goal and we have 10 days left, so if you are interested, back our Kickstarter.

The post PS:1 friendship fuels a Kickstarter appeared first on Pumping Station: One.

November 24 2017

Robots!

This past Tuesday, Jeff Jensen, a long time friend of OMG was at our regular meeting to get some help with mechanical assembly and soldering of a dozen CEENBoT units. Jeff is part of a program that develops the CEENBoT robots for education and the program has been so successful that Jeff is overloaded with requests for new robots, so several OMG members jumped in to help out.

We had several other visitors, including first-time guest Chris, who promptly jumped in to help out. This really embodies the spirit of OMG, creating an environment where folks feel comfortable getting involved in whatever’s going on.

Thanks to everyone who helped out on Tuesday!

November 22 2017

Epoxy Resin Workshop Follow Up

We had a great workshop featuring Resin Painting taught by Emily. Everyone had a great time and made great art. Watching the art work change as the Epoxy mixed and hardened was fascinating. There will be more workshops in the future. Please keep an eye on our mailing lists for the announcement.

November 20 2017

Holiday Make-A-Thon 2017!

Make-A-Thon 2017

MAKESGIVING: A Holiday Make-a-thon!

Top 5 can’t-miss activities at MAKESGIVING: Holiday Make-a-thon.
Why Buy Gifts on Black Friday When You Can Make Them for FREE!

The Milwaukee Makerspace and the Bay View Neighborhood Association is getting ready for the annual Holiday Make-a-thon, where we help kids (and adults) of all ages to get their hands a little dirty and make some of their holiday gifts rather than buy them. MakesGiving: A Holiday Make-a thon!, is a free community event from 1pm-5pm on Black Friday, November 24th, 2017. Join us at the Milwaukee Makerspace, from 1pm-5pm, to learn some new skills and create unique gifts for friends and family.


3D Printed Miniature Refrigerator Vase
Add a magnet and some tiny flowers to a 3D printed vase to bring sunshine and cheer till spring is near. A great gift for someone with a refrigerator or locker!

Laser Cut Ornaments
One of our members designed a 8-part laser cut ornament. Assemble and decorate your very own laser cut Baltic Birch ornament to hang on a tree, a window, or a rear view mirror!


Ever-popular Melted Crayon Ornament
Melt and mix your favorite crayon colors into a clear glass globe. Gift this ornament to share your favorite colors with your favorite person.


Learn to Solder a Tie Pin
Double whammy! Learn to solder and create a tie pin for anyone who has an unwieldy holiday tie. Take that ugly sweater contests!


Braided Fleece Dog Toy
Use the square braid weaving technique and a pile of felt strips to make a chew toy for a special puppy. Even if you don’t have a dog, join us to make some toys and we will donate them to the humane society for dogs in-between homes.

Please RSVP on our Facebook events page if you want to attend. (It’s not required, but it helps us estimate how many people might be joining us!)

November 19 2017

Goodbye TechShop…

TechShop has closed its doors. If you never heard of TechShop, it was a creative space, similar to Milwaukee Makerspace, but it was a for-profit venture with all the best equipment, paid instructors, and fell under the “commercial” category in regards to makerspaces. There were TechShops in various cities across the US, including Detroit and Pittsburgh.

TechShop never made it to Milwaukee (and it won’t now) but if you are interested in starting a space, we here at Milwaukee Makerspace are willing to help. We’ll share what we’ve learned in the last 8 years. (A great deal about how we operate can be found on our wiki.)

We’ve got close to 300 members, and it’s still amazing that a city the size of Milwaukee really only has one community makerspace. People ask if we’re afraid of new competition, but we aren’t. We believe everyone should have access to a makerspace. In the past year or so we’ve seen many of the local universities launch spaces for use by students and faculty, and we’ve seen some amazing maker programs happening in high schools. This is all great, and as makers, it makes us pleased to see more makers.

Outside of Milwaukee, we’ve got some great friends at Sector67 and The Bodgery in Madison, and up north at the Appleton Makerspace. There’s a few other spaces around the state (some of which have failed or failed to gain traction) but Southeastern Wisconsin could certainly support another. (There’s also been an idea floated that Milwaukee Makerspace should open a second location a bit west, like in the Brookfield/Waukesha area. Hmmmmm…)

We consider ourselves fortunate that Milwaukee Makerspace has been as successful as we have been. We don’t do everything right, and we probably aren’t a good fit for everyone, but with 290 members, we’re keeping a good number of makers in the Milwaukee area happy enough to keep coming back. :)

November 17 2017

Feed Your Soul

On November 3rd, 2017 Feeding America Eastern Wisconsin held an event called Feed Your Soul where artists and makers presented object to be auctioned off for charity. Each object began as a plain wooden bowl, and was transformed into amazing art.

(Check out some of the coverage from Fox6 and CBS58.)

We really enjoyed being part of the event, and we’ve got members who are already planning for next year. :)

November 16 2017

Farewell TechShop, and thank you. An open letter to all affected.

Like many, I was surprised and saddened to hear of TechShop’s closing. My name is Nate Bezanson, and I’ve been around i3Detroit since the very early days, back in 2009, before we had a space. Before we were even certain we’d end up in a space! That seems obvious in retrospect, but it might not […]
Older posts are this way If this message doesn't go away, click anywhere on the page to continue loading posts.
Could not load more posts
Maybe Soup is currently being updated? I'll try again automatically in a few seconds...
Just a second, loading more posts...
You've reached the end.

Don't be the product, buy the product!

Schweinderl